MANUFACTURERS OF STAINLESS STEEL STRUCTURAL COMPONENTS

The following companies manufacture stainless steel structural components. Some of these firms maintain inventories of standard products and others sell through service centers unless the order is fairly large and/or custom. The companies are categorized as tube/pipe manufacturers, roll formers, roll forming and roll formed part manufacturers, extruders, or suppliers of large welded fabrications.


Tube and/or Pipe
(Round, Square, Rectangular)

American Stainless Tubing, Inc. (ASTI)
PO Box 909
Troutman, NC 28166 USA
Phone: (704) 878-8823
Fax (704) 878-0777
Email: americanstainless@bellsouth.net
Website: www.asti-nc.com
Product: Type 304, 304L, and 316L round, square, and rectangular mechanical tubing ranging in sizes from 0.5 to 2.5 inches in diameter. Standard lengths are 20, 21, 24, and 30 feet but custom welded tube up to 40 feet long and cut to length options are available. A variety of polished finishes are available. Numerous sizes are stocked by AST.

American Tube
Drawer B
Nazareth, PA 18064
Phone: (610) 759-8700
Fax: (610) 759-8987
Email: Sales@AmTubeCo.com.
Website: www.amtubeco.com/info.htm
Product: Type 304, 304L, 316, and 316L round ornamental and mechanical tubing to order in sizes from 1/4 to 1 inch OD and wall thickness from .010 to .065 inches. They stock some tubing.

Custom Manufacturing & Polishing, Inc.
P.O. Box 3577
Springfield, MO 65808-3577 USA
Phone: (417) 831-7900 or (800) 742-8043
Fax: none listed
Email:sales@cmpionline.com
Website: www.cmpionline.com
Product: Custom fabricator and polisher of pipe, tube, round bar, square and rectangular tubing, channels and angles. Nothing is stocked.

Fischer Canada Stainless Steel Tubing
190 Frobisher Drive
Waterloo, ON N2V 2A2 Canada
Phone: (519) 746-0088 x200 or (800) 563-8823
Fax: (519) 746-3941
Email: fischer@fischerca.com
Website: www.fischerca.com
Product: Types 304 and 316 round tubing from 1/2 to 5 inches, square tubing from 1/2 to 4 inches and rectangular mechanical tubing from 1/2 x 1 inch to 3 x 5 inches. Wall thicknesses range from 0.035 to 0.25 inch. Numerous sizes are stocked.

Marcegaglia USA
Munhall Division
1001 East Waterfront Drive
Munhall, PA 15120
Phone: (412) 462-2185
Fax: (412) 462 6059
Website: www.gruppomarcegaglia.com
Product: Type 304 structural and ornamental round and square tube and pipe. They do not stock tube or pipe.

Phoenix Tube Company, Inc.
1185 Win Drive
Bethlehem, PA 18017 USA
Phone: (610) 865-5337 or (800) 526-2124
Fax: (610) 865-9832
Email: donsm@phoenixtube.com
Website: www.phoenixtube.com
Product: Ornamental and structural tubing for a variety of applications. Standard products are sold through service centers. Sizes and finishes can be tailored to meet specific needs.

Stalatube, Inc.
PO Box 210
Bryn Mawr, PA 19010-0210 USA
Phone: (610) 525-7706 or (888) 647-8252
Fax: (610) 525-5717 or (888) 575-5717
Email: stalatubeinc@aol.com
Website: www.stalatube.com
Product: Type 304 and 316 structural and ornamental tube in Imperial and metric sizes. Square tube from 1 x 1 x 0.060 inch to 12 x 12 x 0.5 inch. Rectangular tube from 1 x 2 x 0.060 inch to 16 x 8 x 0.5 inch. Standard sizes are stocked by service centers and custom sizes or larger orders can be ordered direct. The product is imported from Finland.

Swepco Tube Corp.
1 Clifton Blvd.
PO Box 1899
Clifton, NJ 07015 USA
Phone: (973) 778-3000
Fax: (973) 778-9289
Email: info@swepcotube.com
Website: www.swepcotube.com
Product: Welded structural tube in sizes up to 12 inches with a 1/2 inch wall. Larger sizes up to 24 inches and 1 inch wall are manufactured with longitudinal welds. Sizes through 6 inch square and 6 x 10 inch rectangles are available with up to a 1/2 inch wall from distributor stock in 20 foot random lengths. All stock sizes are available in Type 304 and selected sizes are available in Type 316. Lengths up to 40 feet can be produced.

United Industries, Inc.
1546 Henry Avenue
Beloit, WI 53511 USA
Phone: (608) 365-8891
Fax: (608) 365-1259
Website: unitedindustries.com
Product: Round ornamental tubing in outside diameters from 0.625 to 5 inches and wall thicknesses from 0.024 to 0.109 inch. A range of polished finishes are available. The typical lead time for orders is three to four weeks.


Roll Formed Shapes
(Angles, Channels, Open and Butt Seam Tubing, and Other Shapes)

ACME Structural, Inc.
P.O. Box 778
Springfield, MO 65801 USA
Phone: (417) 865-6691
Fax: (417) 865-6289
Email: acmefab@acmefab.com
Website: www.acmefab.com
Product: Custom fabricator of large stainless structural components using brake forming, angle rolling or welding. They do not stock components.

American Roll Formed Products Corp.
892 Callendar Boulevard
Painesville, OH 44077
Phone: (440) 352-0753
Fax: (440) 352-1959
Email: info@arfp.com
Website: www.americanrollform.com
Product: Custom roll former capable of forming thicknesses from 0.008 to .350 inches and widths from 0.8 to 24 inches.

Kroh-Wagner, Inc.
2331 N. Pulaski Rd.
Chicago, Il. 60639
Phone: (773) 252-2031
Fax: (773) 252-4482
E-mail: sales@krohwagner.com
Website: www.krohwagner.com
Product: Custom roll former of moldings, angles, channels, and custom shapes from 0.005 to 0.075 inches thick. The maximum overall size is 4 inches.

M. P. Metal Products, Inc.
PO Box 170
W1250 Elmwood Avenue
Ixonia, WI 53036 USA
Phone: (800) 824-6744 or (920) 261-9650
Fax: (800) 824-6733 or (920) 261-9652
Email: mpmetals@execpc.com
Website: www.mpmetals.com
Product: Roll-formed and break-formed channels, hat shaped sections, and moldings. Gauges from 0.005 inches to 0.165 inches and widths from 1/2 inch to 48 inches. They do not stock. Minimum order size 30,000 feet.

McDonald Steel Corp.
100 Ohio Avenue
McDonald, OH 44437 USA
Phone: (330) 530-9118 or (800) 253-0319
Fax: (330) 530-8181
Email: sales@mcdonaldsteel.com
Website: www.mcdonaldsteel.com
Product: Hot rolled symetrical and non-symetrical shapes in sizes from 3/8 inch to 11 inches wide including channels, angles, squares, half rounds, half ovals, and numerous others. They do not stock.

North Star Company, Inc.
14912 S. Broadway
Gardena, CA 90248
Phone: (310) 515-2200
Fax: (310) 715-8090
Email: info@northstarcompany.com
Website: www.northstarcompany.com
Product: Custom roll formers of angles, channels, and round and square tubing in thickness from 0.005 to 0.1046 inch.

Oakley Steel Products Company
PO Box 428
650 South 28th Avenue
Bellwood, IL 60104 USA
Phone: (708) 544-7970 or (888) 625-5392
Fax: (708) 544-7986
Email:elibby@oakleysteel.com
Website: www.oakleysteel.com
Product: Roll forms stainless up to two inches thick into rings, tubing, angles, channels, and cylinders. They sell through distrubutors and take custom orders directly.

Pyramid Mouldings
4630 County Road 209 South
Green Cove Springs, FL 32043 USA
Phone: (904) 284-5611
Website: www.pyramidmouldings.com/
Product: Roll forms and stamps light gauge custom and standard components including channel sections, T-shapes, tubes, and other shapes.

Rollform of Jamestown
181 Blackstone Avenue
Jamestown, NY 14701
Phone: (716) 665-5310
Fax: (716) 665-4479
Email: Sales@Rollform.com
Website: www.rollform.com
Product: Custom and standard roll formed shapes with a maximum vertical leg height 3 inches and part thickness of .015 in. to .130 inch.

Samson Roll Formed Products Company
6101 W. Oakton Street
Skokie, IL 60077 USA
Phone: (847) 965-6700
Fax: (847) 965-8950
Email: success@samsonrollform.com
Website: www.samsonrollform.com/
Products: Roll formed standard and custom stainless steel shapes including angles, channels, round and square lock and but seam tubing, and other shapes. For channels and angles, the strip width is limited to 16 inches and the thickness from 0.009 to 0.125 inches. The maximum leg height is 3 inches for channels and 4 inches for angles.

United Roll Forming
58288 County Road 3
Elkhart, IN 46517 USA
Phone: (574) 294-2800
Fax: (219) 522-3957
Website: www.unitedrollforming.org/
Product: Custom roll former of rings, channels, angles, large or complex shapes.

Valbruna Corporation
31 Iron Horse Road
Oakland, NJ 07436 USA
Phone: (201) 337-1233
Fax: (201) 337-0833
Email: njsales@valbruna.com
Website: www.valbruna.com
Product: Stainless steel angles in sizes from 3/4 x 3/4 x 1/8 inch to 4 x 4 x 1/2 inch. Some sizes are stocked.


Extruded Shapes

American Extruded Products (AMEREX)
363 North Sam Houston Parkway East
Suite 1100
Houston, TX 77060 USA
Phone: (281) 582-6575
From Mexico: 001-888-254-9755
Fax: (281) 820-9310
Email: sales@amerexprod.com
Website: www.AMEREXprod.com
Product: Extruder of 300 and 400 series stainless steel. Standard pipe sizes range from 2 to 5 inches in diameter. Other products include angles, tees, I-beams, channels, zees, and custom shapes. The shape must fit within a circle 1/2 to 9 inches in diameter and have a minimum web thickness of 3/16 inch. There is a 2000 pound minimum order size for items that are not stocked. Stocked items are avialable either through AMEREX or one of their distributors. AMEREX also fabricates welded structural components using extruded shapes.

Plymouth Engineered Shapes
201 Commerce Court
Hopkinsville, KY 42240 USA
Phone: (270) 886-6631
Fax: (270) 885-7034
Email: shapes@plymouth.com
Website: www.plymouth.com
Product: Extruded stainless steel shapes including equal and unequal leg angles, beams, tees, and channels. In general, the shape must fit within a 5.5 inch circle and the minimum section thickness is 0.187 inches.


Welded Fabrication

ADF International, Inc.
7548 West Mcnab Road, Suite A-1
North Lauderdale, FL 33068 USA
Phone: 954-340-8854
Fax: 954-340-8856
Website: www.adfgroup.com
Product: Custom fabricates large welded stainless steel structural members including I-beams, angles, square pipe and other shapes.

American Extruded Products (AMEREX)
363 North Sam Houston Parkway East
Suite 1100
Houston, TX 77060 USA
Phone: (281) 582-6575
From Mexico: 001-888-254-9755
Fax: (281) 820-9310
Email: sales@amerexprod.com
Website: www.AMEREXprod.com
Product: AMEREX fabricates welded structural components using extruded shapes. Stocked items are avialable either through AMEREX or one of their distributors. Please see their listing under extruded products for more information.

ADF Group Inc.
300 Henry-Bessemer
Terrebonne, Quebec J6Y 1T3 Canada
Phone: (450) 965-1911
Fax: (450) 963-8912
Website: www.adfgroup.com
Product: Custom fabricates large welded stainless steel structural members including I-beams, angles, square pipe and other shapes.

Chattanooga Boiler & Tank Co.
1011 E Main St.
PO Box 110
Chattanooga, TN 37401 USA
Phone: (423) 266-7118
Fax: (423) 755-6708
Website: www.cbtank.com
Product: Welded I-beams in custom sizes from all forms of stainless steel.

Stainless Structurals LLC
590 Beautyrest Avenue
Jacksonville, FL 32254
Phone: (904) 781-6447
Fax: (904) 781-6444
Website: www.stainless-structurals.com
Locations: Florida
Products stocked: Beams; channels, equal and unequal angles; tees, cold drawn flats; half rounds


Roll Forming and Roll Formed Part Manufacturers

IQS Directory
Products: Roll forming and roll formed parts manufacturers including aluminum channels, steel channels, steel angles, aluminum angles, and metal rings.
Website: http://www.iqsdirectory.com/roll-forming/