Design Data

Mechanical Properties

The minimum mechanical allowable property levels for each grade and product form can be found in the appropriate ASTM specification. The typical values are higher than the minimum and it is possible to designate the appropriate specification and require higher minimum strength levels that are typical of actual production.

Provides typical mechanical property data for the most commonly used structural stainless steels and compares them with other metals used in construction.

Building MaterialTensile Strength to weight ratio Tensile Strength ksi (MPa) Yield Strength, ksi (MPa) Elongation in 2in. (50mm), min. %
Building MaterialTensile Strength to weight ratio Tensile Strength ksi (MPa) Yield Strength, ksi (MPa) Elongation in 2in. (50mm), min. %
Stainless Steels
316 Annealed 25775 (515)75 (515)35
304 Annealed 25775 (515)75 (515)35
2205324105 (723)74 (510)30
HSLA Steel, 3/4 - 1.5 in. (20-40 mm) 23967 (460)46 (315) 21
Structural Steel (plate and bar) 26158/80
(400/550)
36 (250) 23
Carbon steel sheet, cold rolled 16446 (317) 34 (234) 35
Aluminum Alloys
3003-H14 22222 (150)21 (145)40
3105-H14 25525 (170)22 (150) 5
5005-H1626526 (180) 25 (170)5
6061-T6 45945 (310)40 (275)12
6063-T5 276 27 (185) 21 (145)12
Copper11236 (250) 28 (195) 30

Provides representative design values for 0.2% offset yield strength, Young’s modulus and the shear modulus in longitudinal and transverse compression and tension.

From NiDI Design Manual for Structural Stainless Steel

  • LT – Longitudinal tension
  • LC – Longitudinal compression
  • TT – Transverse tension
  • TC – Transverse compression
GradeDirection and type of stress 0.2% Yield Strength ksi (MPa) Young's modulus,
E x 10 6 psi (GPa)
Shear modulus, G 10 6 psi (GPa)
GradeDirection and type of stress 0.2% Yield Strength ksi (MPa) Young's modulus,
E x 10 6 psi (GPa)
Shear modulus, G 10 6 psi (GPa)
304LLT38 (262) 28 (193) 11 (77)
LC36 (250)
TT38 (259) 29 (198)
TC37 (255)
316LLT40 (277) 28 (193) 10.7 (74)
LC41 (285)
TT41 (286) 29 (198)
TC43 (297)
2205LT75 (518)29 (200)11.3 (78)
LC76 (525)
TT79 (544) 30 (207)
TC78 (540)

Provides physical constants and thermal properties.

Building MaterialDensity Lbs/in³
(g/cm³)
Coef. Thermal Expansion 68-212°F (20-100°C)
µin/in °F
(µm/m·°K)
Thermal Conductivity
212°F (100°C)
Btu·in/ft²·hr·F
(W/m·°K)
Building MaterialDensity Lbs/in³
(g/cm³)
Coef. Thermal Expansion 68-212°F (20-100°C)
µin/in °F
(µm/m·°K)
Thermal Conductivity
212°F (100°C)
Btu·in/ft²·hr·F
(W/m·°K)
Stainless Steels
316 0.29 (8.0) 8.8 (15.9) 113 (16.3)
304
0.29 (8.0) 9.6 (17.2) 113 (16.3)
22050.285 (7.85)7.22 (13.0)110 (16.0)
Gray Iron0.27 (7.5)6.6 (11.9)348 (50)
Carbon Steel0.28 (7.8)6.7 (12.1)324 (47)
HSLA Weathering Steel 0.28 (7.8) 6.7 (12.1) 324 (47)
Copper C11000 0.321 (8.89) 9.6 (17.2) 2688 (387)
Alluminum Alloys
3003 H14 0.099 (2.73) 12.9 (23.2) 1100 (159)
3105 0.098 (2.72) 13.1 (23.6) 1190 (172)
50050.098 (2.70) 13.2 (23.75)1390 (200)
6061 T6 0.098 (2.70) 13.1 (23.6) 1160 (167)
6063 T5 0.097 (2.70) 13.0 (23.4) 1450 (209)

(i) Metals Handbook Vol. 2, 10th Edition, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 1990

(ii) Harold E. McGannon, The Making, Shaping & Treating of Steel, 9th Edition, 1971, United States Steel

Dimension/Selection Properties

The Georgia Institute of Technology and Stainless Structurals, LLC intend to develop a guideline for the design of stainless steel structures.

The first phase of this effort is the development of a set of section properties for stainless steel rolled and laser-fused shapes used for construction. This document contains section property tables for five shapes currently produced by Stainless Structurals LLC. It is anticipated that the number of such tables will be increased and documented through updates to this document as new information becomes available.

Part 1: Dimensions and Section Properties‘ is available in our Library.

Common Sizes

Production Method: Hot Rolled or Extruded
Stocked Finish: Mill

  • X = Typically stocked
  • O = Can be ordered
 Stainless Steel Grade   
Size304304L316316L
Size304304L316316L
0.75 x 0.75 x 0.125 XXXX
0.75 x 0.75 x 0.187 XXOO
1 x 1 x 0.125 XXXX
1 x 1 x 0.187 XXXX
1 x 1 x 0.250 XXXX
1 x 1.5 x 0.250 OOOO
1 x 2 x 0.188 OOOO
1 x 2 x 0.250 OOOO
1.125 x 1.75 x 0.188 OOOO
1.25 x 1.25 x 0.125 XXXX
1.25 x 1.25 x 0.187 XXXX
1.25 x 1.25 x 0.25 XXXX
1.25 x 1.75 x 0.188 OOOO
1.25 x 3 x 0.50 OOOO
1.5 x 1.5 x 0.125 XXXX
1.5 x 1.5 x 0.187 XXXX
1.5 x 1.5 x 0.250 XXXX
1.5 x 2 x 0.250 OOOO
1.5 x 2.5 x 0.375 OOOO
1.5 x 3 x 0.187 XXXX
1.5 x 3 x 0.25 XXXX
1.75 x 1.75 x 0.188 OOOO
1.75 x 2.5 x 0.375 OOOO
2 x 2 x 0.125 XXXX
2 x 2 x 0.187 XXXX
2 x 2 x 0.250 XXXX
2 x 2 x 0.375 XXXX
2 x 2.5 x 0.250 OOOO
2 x 3 x 0.187 XXXX
2 x 3 x 0.25 XXXX
2 x 3 x 0.375 XXXX
2 x 3.5 x 0.250 OOOO
2 x 4 x 0.250 OOOO
2 x 6 x 0.250 OOOO
2.5 x 2.5 x 0.187 XXXX
2.5 x 2.5 x 0.25 XXXX
2.5 x 2.5 x 0.375 XXXX
2.5 x 3 x 0.188 OOOO
2.5 x 3 x 0.25 XXXX
2.5 x 3 x 0.375 XXXX
2.5 x 3.5 x 0.375 OOOO
3 x 3 x 0.187 XXXX
3 x 3 x 0.250 XXXX
3 x 3 x 0.312 XXXX
3 x 3 x 0.375 XXXX
3 x 3 x 0.500 XXXX
3 x 3.5 x 0.250 XXXX
3 x 4 x 0.250 XXXX
3 x 4 x 0.375 XXXX
3 x 4 x 0.500 OOOO
3 x 5 x 0.250 XXXX
3 x 5 x 0.375 XXXX
3 x 6 x 0.375 XOOO
3.5 x 3.5 x 0.250 XXXX
3.5 x 3.5 x 0.313 OOOO
3.5 x 3.5 x 0.375 XXXX
3.5 x 3.5 x 0.500 XOXX
3.5 x 4 x 0.313 OOOO
3.5 x 4 x 0.500 OOOO
3.5 x 5 x 0.375 XXXX
3.5 x 6 x 0.375 OOOO
4 x 4 x 0.188 OOOO
4 x 4 x 0.250XXXX
4 x 4 x 0.313 OOOO
4 x 4 x 0.375 XXXX
4 x 4 x 0.500 XXXX
4 x 6 x 0.25 XXXX
4 x 6 x 0.313 OOOO
4 x 6 x 0.375 XXXX
4 x 6 x 0.500 OOOO
5 x 5 x 0.313 OOOO
5 x 5 x 0.375 XOOO
5 x 5 x 0.750 OOOO
6 x 6 x 0.375 XXOO

Production Method: Extruded or Welded
Stocked Finish: Mill

Welded fabrications can be obtained in any size on a custom basis. Sizes up to 16 inches are most readily available.

  • X = Typically stocked
  • O = Can be ordered
 Stainless Steel Grade   
Size (inches)304304L316316L
Size (inches)304304L316316L
3 x 2.33 x 0.187 OOOO
3 x 2.375 x 0.250 XXOO
3 x 2.375 x 0.375 OOOO
3 x 2.509 x 0.349 OOOO
4 x 2.663 x 0.193 OOOO
4 x 2.663 x 0.250 OOOO
4 x 2.750 x 0.250 XXOO
4 x 2.750 x 0.356 XXOO
4 x 4 x 0.25 XOOO
5 x 3 x 0.312 OOOO
5 x 3 x 0.326 XXOO
5 x 5 x 0.25 XOOO
5 x 5 x 0.354 OOOO
5.9 x 5.9 x 0.236 XOOO
5.9 x 5.9 x 0.315 XOOO
6 x 3.33 x 0.359 XXOO
6 x 4 x 0.25 XOOO
6 x 6 x 0.232 OOOO
6 x 6 x 0.25 XOOO
7.87 x 7.87 0.315 XOOO

Production Method: Hot Rolled or Extruded
Stocked Finish:  Mill

  • X = Typically stocked
  • O = Can be ordered
 Stainless Steel Grade   
Size304304L316316L
Size304304L316316L
1.5 x 0.75 x 0.125 XXXX
2 x 1 x 0.125 XXXX
2 x 1 x 0.1875 XXXX
2 x 1 x 0.250 XXXX
3 x 1.375 x 0.188 XXXX
3 x 1.50 x 0.188 XXXX
3 x 1.50 x 0.250 XXXX
4 x 1 x 0.188 OOOO
4 x 1.75 x 0.250 XXXX
4 x 2 x 0.188 OOOO
4 x 2 x 0.250 XXXX
4 x 2.5 x 0.500 OOOO
5 x 1.875 x 0.375 XXXX
5 x 2.50 x 0.250 XXXX
6 x 1.5 x 0.375OOOO
6 x 1.90 x 0.343 XXXX
6 x 1.92 x 0.343 OOOO
6 x 2.5 x 0.310 OOOO
6 x 3 x 0.250 XXXX
6 x 3 x 0.375 XXXX
6 x 3 x 0.354 OOOO
8 x 2.530 x 0.390 XXXX
8 x 4 x 0.250 XXXX
8 x 4 x 0.375 XXXX

Production Method: Hot Rolled or Extruded
Stocked Finish:  Mill

  • X = Typically stocked
  • O = Can be ordered
  Stainless Steel Grade   
Size
Nominal x OD x Wall
Schedule304304L316316L
Size
Nominal x OD x Wall
Schedule304304L316316L
1 x 1.315 x 0.065 5XXXX
1 x 1.315 x 0.109 10XXXX
1 x 1.315 x 0.133 40XXXX
1 x 1.315 x 0.179 80XXXX
1.25 x 1.660 x 0.065 5XXXX
1.25 X 1.660 x 0.140 40XXXX
1.25 X 1.660 X 0.191 80XXXX
1.50 x 1.90 x 0.065 5XXXX
1.50 x 1.90 x 0.109 10XXXX
1.50 x 1.90 x 0.145 40XXXX
1.50 x 1.90 x 0.20 80XXXX
2 x 2.375 x 0.065 5XXXX
2 x 2.375 x 0.109 10XXXX
2 x 2.375 x 0.15440XXXX
2 x 2.375 x 0.218 80XXXX
2 x 2.375 x 0.343 160OOOO
2 x 2.375 x 0.436 XXHVY OOOO
2.5 x 2.875 x 0.20340XXXX
2.5 x 2.875 x 0.276 80XXXX
2.5 x 2.875 x 0.375 160OOOO
2.5 x 2.875 x 0.552 XXHVYOOOO
3 x 3.5 x 0.083 5XXXX
3 x 3.5 x 0.120 10XXXX
3 x 3.50 x 0.216 40XXXX
3 x 3.50 x 0.300 80XXXX
3 x 3.50 x 0.438 160OOOO
3 x 3.50 x 0.600 XXHVYOOOO
3.50 x 4 x 0.083 5XXXX
3.50 x 4 x 0.120 10XXXX
3.50 x 4 x 0.226 40XXXX
3.50 x 4 x 0.318 80XXXX
3.50 x 4 x 0.636 XXHVYOOOO
4 x 4.50 x 0.12010XXXX
4 x 4.50 x 0.237 40XXXX
4 x 4.50 x 0.281 60OOOO
4 x 4.50 x 0.337 80XXXX
4 x 4.50 x 0.438 120OOOO
4 x 4.50 x 0.531 160OOOO
4 x 4.50 x 0.674 XXHVYOOOO
5 x 5.563 x 0.134 10XXXX
5 x 5.563 x 0.258 40XXXX
5 x 5.563 x 0.375 80XXXX
5 x 5.563 x 0.500 120OOOO
5 x 5.563 x 0.625 160OOOO
5 x 5.563 x 0.750 XXHVYOOOO
6 x 6.625 x 0.134 10XXXX
6 x 6.625 x 0.280 40XXXX
6 x 6.625 x 0.432 80XXXX
8 x 8.625 x 0.148 10XXXX
8 x 8.625 x 0.322 40XXXX
8 x 8.625 x 0.500 80XOOX
10 x 10.750 x 0.165 10XXXX
10 x 10.750 x 0.365 40XXXX
10 x 10.750 x 0.500 80XOOX
12 x 12.750 x 0.180 10XXXX
12 x 12.750 x 0.375 40XXXX
12 x 12.750 x 0.500 80XOOX

Production Methods: Hot Rolled or Extruded
Stocked finishes:  Mill or Polished

  • X = Typically stocked
  • O = Can be ordered
  • P = Polished finishes available from some suppliers
 Stainless Steel Grade   
Size x Wall Thickness (inches)304304L316316L
Size x Wall Thickness (inches)304304L316316L
0.312 x 1.5 x 0.049 XPXPOXP
0.312 x 1.5 x 0.065 XPXPOXP
0.5 x 1 x 0.035 XXOO
0.5 x 1 x 0.049 XXOO
0.5 x 1 x 0.065 XXOO
0.5 x 1 x 0.083 XXOO
0.5 x 1 x 0.109 XXOO
0.5 x 1 x 0.120 XXOO
0.5 x 1 x 0.148 OOOO
0.5 x 1 x 0.180 OOOO
0.5 x 1 x 0.250 OOOO
0.5 x 1.5 x 0.049 XPXPOXP
0.5 x 1.5 x 0.065 XPXPOXP
0.75 x 1.25 x 0.035 XXOO
0.75 x 1.25 x 0.049 XXOO
0.75 x 1.25 x 0.065 XXOO
0.75 x 1.25 x 0.083 XXOO
0.75 x 1.25 x 0.109 XXOO
0.75 x 1.25 x 0.120 XXOO
0.75 x 1.25 x 0.148 OOOO
0.75 x 1.25 x 0.180OOOO
0.75 x 1.25 x 0.250 OOOO
0.75 x 1.5 x 0.065 X
0.75 x 1.5 x 0.120 X
1 x 1.50 x 0.035 XPXPOO
1 x 1.50 x 0.049 XPXPOO
1 x 1.50 x 0.065 XPXPOO
1 x 1.50 x 0.083 XPXPOO
1 x 1.50 x 0.109 XPXPOO
1 x 1.50 x 0.120 XPXPOO
1 x 1.50 x 0.148 OOOO
1 x 1.50 x 0.180 OOOO
1 x 1.50 x 0.250 OOOO
1 x 2 x 0.035 XPXPOO
1 x 2 x 0.049 XPXPOO
1 x 2 x 0.060 XPXP
1 x 2 x 0.065 XPXPXX
1 x 2 x 0.083 XPXPOO
1 x 2 x 0.109 XPXPOO
1 x 2 x 0.120 XPXPXX
1 x 2 x 0.148 XPXPOO
1 x 2 x 0.180 XPXPOO
1 x 2 x 0.250 OOOO
1 x 2.50 x 0.065 XPXPOO
1 x 3 x 0.035 XXOO
1 x 3 x 0.049 XXOO
1 x 3 x 0.065XXOO
1 x 3 x 0.083 XXOO
1 x 3 x 0.109XXOO
1 x 3 x 0.120 XXOO
1 x 3 x 0.148 XXOO
1 x 3 x 0.180 XXOO
1 x 3 x 0.250 XXOO
1.25 x 1.5 x 0.035 XPXPOO
1.25 x 1.5 x 0.049 XPXPOXP
1.25 x 1.5 x 0.065 XPXPOXP
1.25 x 1.5 x 0.083 XPXPOO
1.25 x 1.5 x 0.109 XPXPOO
1.25 x 1.5 x 0.120 XPXPOO
1.25 x 1.5 x 0.148 OOOO
1.25 x 1.5 x 0.180 OOOO
1.25 x 1.5 x 0.250 OOOO
1.25 x 1.75 x 0.035XPXPOO
1.25 x 1.75 x 0.049 XPXPOO
1.25 x 1.75 x 0.065XPXPOO
1.25 x 1.75 x 0.083 XPXPOO
1.25 x 1.75 x 0.109 XPXPOO
1.25 x 1.75 x 0.120 XPXPOO
1.25 x 1.75 x 0.148 XPXPOO
1.25 x 1.75 x 0.180XPXPOO
1.25 x 1.75 x 0.250OOOO
1.25 x 2.0 x 0.035XPXPOO
1.25 x 2.0 x 0.049 XPXPOO
1.25 x 2.0 x 0.065 XPXPOO
1.25 x 2.0 x 0.083XPXPOO
1.25 x 2.0 x 0.109 XPXPOO
1.25 x 2.0 x 0.120XPXPOO
1.25 x 2.0 x 0.148 XPXPOO
1.25 x 2.0 x 0.180 XPXPOO
1.25 x 2.0 x 0.250 OOOO
1.50 x 1 x 0.120 X
1.50 x 1.75 x 0.035 XXOO
1.50 x 1.75 x 0.049 XXOO
1.50 x 1.75 x 0.065 XXOO
1.50 x 1.75 x 0.083 XXOO
1.50 x 1.75 x 0.109 XXOO
1.50 x 1.75 x 0.120XXOO
1.50 x 1.75 x 0.148 XXOO
1.50 x 1.75 x 0.180 XXOO
1.50 x 1.75 x 0.250 OOOO
1.50 x 2 x 0.035 XPXPOO
1.50 x 2 x 0.049 XPXPOO
1.50 x 2 x 0.065 XPXPOO
1.50 x 2 x 0.083XPXPOO
1.50 x 2 x 0.109 XPXPOO
1.50 x 2 x 0.120XPXPOO
1.50 x 2 x 0.148 XPXPOO
1.50 x 2 x 0.180 XPXPOO
1.50 x 2 x 0.250 OOOO
1.50 x 2.5 x 0.035 XPXPOO
1.50 x 2.5 x 0.049 XPXPOXP
1.50 x 2.5 x 0.065 XPXPOXP
1.50 x 2.5 x 0.083 XPXPOO
1.50 x 2.5 x 0.109 XPXPOO
1.50 x 2.5 x 0.120 XPXPOO
1.50 x 2.5 x 0.148 XPXPOO
1.50 x 2.5 x 0.180 XPXPOO
1.50 x 2.5 x 0.250 XPXPOO
1.50 x 3.0 x 0.035 XPXPOO
1.50 x 3.0 x 0.049 XPXPOO
1.50 x 3.0 x 0.065 XPXPOO
1.50 x 3.0 x 0.083 XPXPOO
1.50 x 3.0 x 0.109 XPXPOO
1.50 x 3.0 x 0.120 XPXPOO
1.50 x 3.0 x 0.148 XPXPOO
1.50 x 3.0 x 0.180 XPXPOO
1.50 x 3.0 x 0.250 XPXPOO
2 x 3 x 0.035 XPXPOO
2 x 3 x 0.049 XPXPOO
2 x 3 x 0.065 XPXPOO
2 x 3 x 0.083 XPXPOO
2 x 3 x 0.109 XPXPOO
2 x 3 x 0.120 XPXPXX
2 x 3 x 0.148 XPXPOO
2 x 3 x 0.180 XPXPOO
2 x 3 x 0.250 XPXPOO
2 x 4 x 0.035 XPXPOO
2 x 4 x 0.049 XPXPOO
2 x 4 x 0.065 XPXPOO
2 x 4 x 0.083 XPXPOO
2 x 4 x 0.109 XPXPOO
2 x 4 x 0.120XPXPOO
2 x 4 x 0.148 XPXPOO
2 x 4 x 0.180 XPXPOO
2 x 4 x 0.250 XPXPXX
2 x 5 x 0.120 XOOO
2 x 5 x 0.180 XOOO
2 x 5 x 0.250 XOOO
2 x 6 x 0.120 XOOO
2 x 6 x 0.180 XOOO
2 x 6 x 0.250 XOOO
3 x 4 x 0.035XXOO
3 x 4 x 0.049 XXOO
3 x 4 x 0.065 XXOO
3 x 4 x 0.083 XXOO
3 x 4 x 0.109 XXOO
3 x 4 x 0.120 XXOO
3 x 4 x 0.148 XXOO
3 x 4 x 0.180 XXOO
3 x 4 x 0.250 XXOO
3 x 5 x 0.035 XXOO
3 x 5 x 0.049 XXOO
3 x 5 x 0.065XXOO
3 x 5 x 0.083 XXOO
3 x 5 x 0.109 XXOO
3 x 5 x 0.120 XXOO
3 x 5 x 0.148 XXOO
3 x 5 x 0.180 XXOO
3 x 5 x 0.250XXOO
3 x 6 x 0.180 XXOO
3 x 6 x 0.250 XXOO
4 x 6 x 0.180 XXOO
4 x 6 x 0.250 XXOO
4 x 6 x 0.375 XXOO
4 x 8 x 0.180 XXOO
4 x 8 x 0.250 XXOO
4 x 8 x 0.375 XXOO
4 x 12 x 0.180 XXOO
4 x 12 x 0.250 XXOO
4 x 12 x 0.375 XXOO
4 x 12 x 0.500 XXOO
6x 10 x 0.180 XXOO
6x 10 x 0.250 XXOO
6x 10 x 0.375 XXOO
6x 10 x 0.500 XXOO
6 x 12 x 0.250 XXOO
6 x 12 x 0.375 XXOO
6 x 12 x 0.500 XXOO
8 x 12 x 0.250 XXOO
8 x 12 x 0.375 XXOO
8 x 12 x 0.500 XXOO
8 x 16 x 0.250 XXOO
8 x 16 x 0.375 XXOO
8 x 16 x 0.500 XXOO

Production Methods: Hot Rolled or Extruded
Stocked finishes:  Mill or Polished

  • X = Typically stocked
  • O = Can be ordered
  • P = Polished finishes available from some suppliers
 Stainless Steel Grade   
Size (inches)
OD x wall thickness
304304L316316L
Size (inches)
OD x wall thickness
304304L316316L
0.50 x 0.028 XPXP
0.50 x 0.031XPO
0.50 x 0.035 XPXPXP
0.50 x 0.049 XPXPXP
0.50 x 0.065 XPXPXP
0.50 x 0.083 XPXPXP
0.625 x 0.028XPXP
0.625 x 0.031 XPO
0.625 x 0.035 XPXPXP
0.625 x 0.049 XPXPXP
0.625 x 0.065XPXPXP
0.625 x 0.083XPXPXP
0.625 x 0.095 XPXP
0.625 x 0.109XPO
0.75 x 0.028 XPXP
0.75 x 0.031 XPXPOO
0.75 x 0.035 XPXPOXP
0.75 x 0.049 XPXPOXP
0.75 x 0.065 XPXPOXP
0.75 x 0.083 XPXPOXP
0.75 x 0.095 XPXP
0.75 x 0.109 XPXPOXP
0.875 x 0.028XPXP
0.875 x 0.031 XPOOO
0.875 x 0.035 XPOOXP
0.875 x 0.049 XPOOXP
0.875 x 0.065 XPOOXP
0.875 x 0.083 XPOOXP
0.875 x 0.095 XPXP
0.875 x 0.109 XPOOXP
0.875 x 0.120XPOOXP
0.940 x 0.031 XPOOO
0.940 x 0.035 XPOOO
0.940 x 0.049 XPOOO
0.940 x 0.065 XPOOO
0.940 x 0.083 XPOOO
0.940 x 0.109 XPOOO
0.940 x 0.120 XPOOO
1 x 0.028 XPXOXP
1 x 0.031 XPOOO
1 x 0.035 XPXOXP
1 x 0.049 XPXOXP
1 x 0.065 XPXXXP
1 x 0.083XPXOXP
1 x 0.095 XPXOXP
1 x 0.109 XPOOXP
1 x 0.120 XPOXXP
1 x 0.148 OOOO
1 x 0.180 OOOO
1 x 0.188 XOOO
1 x 0.250 OOOO
1.062 x 0.028 XPXOX
1.062 x 0.035 XPXOX
1.062 x 0.049 XPXOX
1.062 x 0.065 XPXOX
1.062 x 0.083 XPXOX
1.062 x 0.095 XPXOX
1.062 x 0.109 XPXOX
1.062 x 0.120 XPXOX
1.125 x 0.028 XPXOXP
1.125 x 0.035 XPXOXP
1.125 x 0.049XPXOXP
1.125 x 0.065 XPXOXP
1.125 x 0.083 XPXOXP
1.125 x 0.095XPXOXP
1.125 x 0.109XPXOXP
1.125 x 0.120 XPOOXP
1.125 x 0.148 OOOO
1.125 x 0.180 OOOO
1.125 x 0.250OOOO
1.250 x 0.028XPXOXP
1.250 x 0.035 XPXOXP
1.250 x 0.049XPXOXP
1.250 x 0.065 XPXOXP
1.250 x 0.083 XPXOXP
1.250 x 0.095 XPXOXP
1.250 x 0.109 XPOOXP
1.250 x 0.120 XPOOXP
1.250 x 0.148 OOOO
1.250 x 0.180 OOOO
1.250 x 0.188 XOOO
1.250 x 0.250 OOOO
1.313 x 0.035 XPOOO
1.313 x 0.049XPOOO
1.313 x 0.065 XPOOO
1.313 x 0.083XPOOO
1.313 x 0.109 XPOOO
1.313 x 0.120 XPOOO
1.375 x 0.035 XPOOXP
1.375 x 0.049XPOOXP
1.375 x 0.065XPOOXP
1.375 x 0.083 XPOOXP
1.375 x 0.095 XPOOXP
1.375 x 0.109 XPOOXP
1.375 x 0.120 XPOOXP
1.375 x 0.148 OOOO
1.375 x 0.180OOOO
1.375 x 0.250OOOO
1.50 x 0.035 XPOOXP
1.50 x 0.049 XPOOXP
1.50 x 0.065 XPOOXP
1.50 x 0.083 XPOOXP
1.50 x 0.095 XPOOXP
1.50 x 0.109 XPOOXP
1.50 x 0.120 XPOOXP
1.50 x 0.148 OOOO
1.50 x 0.180OOOO
1.50 x 0.188 XOOO
1.50 x 0.250 OOOO
1.625 x 0.035 XPOOXP
1.625 x 0.049XPOOXP
1.625 x 0.065 XPOOXP
1.625 x 0.083 XPOOXP
1.625 x 0.095 XPOOXP
1.625 x 0.109 XPOOXP
1.625 x 0.120 XPOOXP
1.625 x 0.148 OOOO
1.625 x 0.180 OOOO
1.625 x 0.250 OOOO
1.75 x 0.035XPOOXP
1.75 x 0.049 XPOOXP
1.75 x 0.065 XPOOXP
1.75 x 0.083 XPOOXP
1.75 x 0.095XPOOXP
1.75 x 0.109 XPOOXP
1.75 x 0.120 XPOOXP
1.75 x 0.148 OOOO
1.75 x 0.180 OOOO
1.75 x 0.188 XOOO
1.75 x 0.250 OOOO
1.875 x 0.035XPOOXP
1.875 x 0.049 XPOOXP
1.875 x 0.065 XPOOXP
1.875 x 0.083 XPOOXP
1.875 x 0.109 XPOOXP
1.875 x 0.120 XPOOXP
1.9 x 0.035 XPOOXP
1.9 x 0.049 XPOOXP
1.9 x 0.065 XPOOXP
1.9 x 0.083 XPOOXP
1.9 x 0.095 XPOOXP
1.9 x 0.109 XPOOXP
1.9 x 0.120XPOOXP
1.9 x 0.148 XOOO
1.9 x 0.180 OOOO
1.9 x 0.250OOOO
2 x 0.035 XPOOXP
2 x 0.049 XPOOXP
2 x 0.065 XPOOXP
2 x 0.083 XPOOXP
2 x 0.095 XPOOXP
2 x 0.109 XPOOXP
2 x 0.120 XPOOXXP
2 x 0.148 XOOO
2 x 0.180 OOOO
2 x 0.188 XOOO
2 x 0.250 OOOO
2.047 x 0.049 XPOOO
2.047 x 0.065 XPOOO
2.047 x 0.083 XPOOO
2.047 x 0.109 XPOOO
2.047 x 0.120 XPOOO
2.25 x 0.035 XOOO
2.25 x 0.049 XPOOXP
2.25 x 0.065 XPOOXP
2.25 x 0.083 XPOOXP
2.25 x 0.095 XPOOXP
2.25 x 0.109 XPOOXP
2.25 x 0.120 XPOOXP
2.25 x 0.148 XOOO
2.25 x 0.180 XOOO
2.25 x 0.188 XOOO
2.25 x 0.250 OOOO
2.375 x 0.035 XOOO
2.375 x 0.049 XPOOO
2.375 x 0.065 XPOOO
2.375 x 0.083XPOOO
2.375 x 0.109 XPOOO
2.375 x 0.120 XPOOO
2.375 x 0.148 XOOO
2.375 x 0.180 XOOO
2.375 x 0.250 OOOO
2.5 x 0.035 XPOOXP
2.5 x 0.049 XPOOXP
2.5 x 0.065 XPOOXP
2.5 x 0.083 XPOOXP
2.5 x 0.095 XPOOXP
2.5 x 0.109 XPOOXP
2.5 x 0.120XPOOXP
2.5 x 0.148 XOOO
2.5 x 0.180 XOOO
2.5 x 0.250 XOOO
2.563 x 0.049 XPOOO
2.563 x 0.065 XPOOO
2.563 x 0.083 XPOOO
2.563 x 0.109 XPOOO
2.563 x 0.120 XPOOO
2.75 x 0.035 OOOO
2.75 x 0.049 XOOO
2.75 x 0.065 XOOO
2.75 x 0.083 XOOO
2.75 x 0.109XOOO
2.75 x 0.120 XOOO
2.75 x 0.148 XOOO
2.75 x 0.180 XOOO
2.75 x 0.250 XOOO
2.875 x 0.065XPOOO
2.875 x 0.083 XPOOO
2.875 x 0.109 XPOOO
2.875 x 0.120 XPOOO
2.875 x 0.148 XPOOO
2.875 x 0.180 XPOOO
3 x 0.035 OOOO
3 x 0.049 XOOO
3 x 0.065 XPOOO
3 x 0.083 XPOOO
3 x 0.109XPOOO
3 x 0.120 XPOOO
3 x 0.148 XPOOO
3 x 0.180 XPOOO
3 x 0.188 XOOO
3 x 0.250XOOO
3.125 x 0.065XPOOO
3.125 x 0.083 XPOOO
3.125 x 0.109XPOOO
3.125 x 0.120 XPOOO
3.125 x 0.149 XPOOO
3.125 x 0.180 XPOOO
3.25 x 0.120 XOOO
3.5 x 0.035 OOOO
3.5 x 0.049 XOOO
3.5 x 0.065 XPOOO
3.5 x 0.083 XOOO
3.5 x 0.109 XOOO
3.5 x 0.120 XOOO
3.5 x 0.148XOOO
3.5 x 0.180 XOOO
3.5 x 0.250 XOOO
4 x 0.035 OOOO
4 x 0.049 XOOO
4 x 0.065 XPOOO
4 x 0.083 XPOOO
4 x 0.109 XPOOO
4 x 0.120 XPOXX
4 x 0.148 XPOOO
4 x 0.180 XPOOO
4 x 0.250 XOOO
4.5 x 0.035 OOOO
4.5 x 0.049 XOOO
4.5 x 0.065 XOOO
4.5 x 0.083 XOOO
4.5 x 0.109 XOOO
4.5 x 0.120 XOOO
4.5 x 0.148 XOOO
4.5 x 0.180 XOOO
4.5 x  0.250 XOOO
5 x 0.035 OOOO
5 x 0.049 XOOO
5 x 0.065 XPOOO
5 x 0.083 XPOOO
5 x 0.109 XPOOO
5 x 0.120 XPOOO
5 x 0.148 XPOOO
5 x 0.180 XPOOO
5 x 0.250 XOOO
6 x 0.120 XOOO

Production Methods: Hot Rolled or Extruded
Stocked Finishes:  Mill or Polished

  • X = Typically stocked
  • O = Can be ordered
  • P = Polished finishes available from some suppliers
 Stainless Steel Grade   
Size (inches)
x wall thickness
304304L316316L
Size (inches)
x wall thickness
304304L316316L
0.375 x 0.035XPO
0.375 x 0.049XPO
0.375 x 0.065XPO
0.375 x 0.083OO
0.375 x 0.109OO
0.5 x 0.035XPO
0.5 x 0.049XPO
0.5 x 0.065XPO
0.5 x 0.083OO
0.5 x 0.109OO
0.5 x 0.120OO
0.5 x 0.148OO
0.5 x 0.180OO
0.625 x 0.035XPO
0.625 x 0.049XPO
0.625 x 0.065XPO
0.625 x 0.083OO
0.625 x 0.109OO
0.625 x 0.120OO
0.625 x 0.148OO
0.625 x 0.180OO
0.625 x 0.25OO
0.75 x 0.035XPXPXP
0.75 x 0.049XPXPXP
0.75 x 0.065XPXPXP
0.75 x 0.083XO
0.75 x 0.109XO
0.75 x 0.120XO
0.75 x 0.148OO
0.75 x 0.180OO
0.75 x 0.25OO
0.875 x 0.035XPXO
0.875 x 0.049XPXO
0.875 x 0.065XPXO
0.875 x 0.083XO
0.875 x 0.109XO
0.875 x 0.120XO
0.875 x 0.148OO
0.875 x 0.180OO
0.875 x 0.25OO
1 x 0.035XPXXP
1 x 0.049XPXXXP
1 x 0.060XOOO
1 x 0.065XPXXXP
1 x 0.080XOOO
1 x 0.083XPXXXP
1 x 0.109XOXX
1 x 0.120XOXX
1 x 0.148OOOO
1 x 0.180XOOO
1 x 0.250OOOO
1.125 x 0.035XPOOO
1.125 x 0.049XPOOO
1.125 x 0.065XPOOO
1.125 x 0.083XOOO
1.125 x 0.109XOOO
1.125 x 0.120XOOO
1.125 x 0.148OOOO
1.125 x 0.180OOOO
1.125 x 0.250OOOO
1.25 x 0.035XOOO
1.25 x 0.049XPXOXP
1.25 x 0.60XOOO
1.25 x 0.065XPXXXP
1.25 x 0.080XOOO
1.25 x 0.083XOXX
1.25 x 0.120XOXX
1.25 x 0.148OOOO
1.25 x 0.180OOOO
1.25 x 0.250OOOO
1.375 x 0.035XPOOO
1.375 x 0.049XPOOO
1.375 x 0.065XPOOO
1.375 x 0.083XOOO
1.375 x 0.109XOOO
1.375 x 0.120XOOO
1.375 x 0.148OOOO
1.375 x 0.180OOOO
1.375 x 0.250OOOO
1.50 x 0.035XOOO
1.50 x 0.049XPXXXP
1.50 x 0.065XPXXXP
1.50 x 0.083XPXXXP
1.50 x 0.109XOOO
1.50 x 0.120XPOXO
1.50 x 0.148XOOO
1.50 x 0.180XOXO
1.50 x 0.250OOOO
1.625 x 0.035XOOO
1.625 x 0.049XOOO
1.625 x 0.065XOOO
1.625 x 0.083XOOO
1.625 x 0.109XOOO
1.625 x 0.120XOOO
1.625 x 0.148XOOO
1.625 x 0.180XOOO
1.625 x 0.250OOOO
1.75 x 0.035XOOO
1.75 x 0.049XOOO
1.75 x 0.065XOXX
1.75 x 0.083XPOXX
1.75 x 0.109XOOO
1.75 x 0.120XOXX
1.75 x 0.148XOOO
1.75 x 0.180XOOO
1.75 x 0.250OOOO
1.875 x 0.035XOOO
1.875 x 0.049XOOO
1.875 x 0.065XOOO
1.875 x 0.083XOOO
1.875 x 0.109XOOO
1.875 x 0.120XOOO
1.875 x 0.148XOOO
1.875 x 0.180XOOO
1.875 x 0.250OOOO
2 x 0.035XOOO
2 x 0.049XPOOXP
2 x 0.060XOOO
2 x 0.065XPOXXP
2 x 0.080XOOO
2 x 0.083XPOXXP
2 x 0.109XOXX
2 x 0.120XPOXX
2 x 0.148XOOO
2 x 0.180XOXX
2 x 0.188XOOO
2 x 0.250XOXX
2.25 x 0.035OOOO
2.25 x 0.049XOOO
2.25 x 0.065XOOO
2.25 x 0.083XOOO
2.25 x 0.109XOOO
2.25 x 0.120XOOO
2.25 x 0.148XOOO
2.25 x 0.180XOOO
2.25 x 0.250XOOO
2.5 x 0.035OOOO
2.5 x 0.049XOOO
2.5 x 0.065XOXX
2.5 x 0.083XOXX
2.5 x 0.109XOOO
2.5 x 0.120XOXX
2.5 x 0.148XOOO
2.5 x 0.180XOXX
2.5 x 0.250XOXX
3 x 0.035OOOO
3 x 0.049XOOO
3 x 0.065XOOO
3 x 0.080OOO
3 x 0.083XOOO
3 x 0.109XOOO
3 x 0.120XOXX
3 x 0.148XOOO
3 x 0.180XOXX
3 x 0.188XOOO
3 x 0.250XOXX
3.5 x 0.035OOOO
3.5 x 0.049XOOO
3.5 x 0.065XOOO
3.5 x 0.083XOOO
3.5 x 0.109XOOO
3.5 x 0.120XOOO
3.5 x 0.148XOOO
3.5 x 0.180XOOO
3.5 x 0.250XOOO
4 x 0.035OOOO
4 x 0.049XOOO
4 x 0.065XOOO
4 x 0.083XOOO
4 x 0.120XOXX
4 x 0.148XOOO
4 x 0.180XOXX
4 x 0.188XOOO
4 x 0.250XOXX
5 x 0.180XOOO
5 x 0.250XOXX
6 x 0.180XOXX
6 x 0.250XOXX
6 x 0.375XOOO
6 x 0.500XOOO
8 x 0.180XOOO
8 x 0.250XOOO
8 x 0.375XOOO
8 x 0.500XOOO
10 x 0.180XOOO
10 x 0.250XOOO
10 x 0.375XOOO
10 x 0.500XOOO
12 x 0.250XOOO
12 x 0.375XOOO
12 x 0.500XOOO

Production Method: Extruded
Stocked Finish: Mill

  • X = Typically stocked
  • O = Can be ordered
  • P = Polished finishes available from some suppliers
 Stainless Steel Grade   
Size304304L316316L
Size304304L316316L
1 x 1 x 0.250 OOOO
1.50 x 1.50 x 0.188 XXOO
1.50 x 1.50 x 0.250 XXOO
1.625 x 1.375 x 0.250 OOOO
1.625 x 2.625 x 0.375 OOOO
2 x 2 x 0.1875 XXOO
2 x 2 x 0.250 XXOO
2 x 3 x 0.250 OOOO
2.50 x 2.50 x 0.250 XXOO
3 x 2.50 x 0.375 OOOO
3 x 3 x 0.250 XXOO
3 x 3 x 0.375 OOOO
4 x 3 x 0.188 OOOO
4 x 3 x 0.250 OOOO
4 x 4 x 0.375 XXOO